Skip to content

Robot Charging Method

Robot Charging Method

Attention

The OriginCar power supply is a 12.6V 2600mAh power lithium battery, and the car supports being powered on and used while charging.

The current battery voltage of the car can be observed in real time on the small screen on the car's roof. If the voltage is lower than 9.5V, charge the car promptly; the full-charge voltage is 12.6V, and it may decline somewhat depending on usage duration/frequency, which is normal.

Charging

The OriginCar charging port is located inside the car's chassis. Only after opening the chassis baffle and using the specified charger can the car be charged; otherwise the circuit may easily be damaged or the battery may fail to charge.

Procedure

  • Plug the DC connector of the charger into the OriginCar charging port;

  • Plug the AC connector of the charger into a 220V mains socket. When the light on the charger shows red, charging is in progress;

  • After charging is complete, the LED on the charger turns green, charging has ended, and the charger can be unplugged.

Charging port

Image 1