Skip to content

Hardware Introduction

Hardware Introduction

Introduction to the Motion Board and Controller Board

OriginCarPro Mainboard

The OriginCarPro PCB is shown below OriginCar_pcb

The commonly used interfaces are described below

  • Motor enable toggle switch: Located on the upper-left side of the front of the board, it is the enable toggle switch for the motors. The motors can rotate only when it is kept in the ON state.

  • TypeC ports: The OriginCarPro mainboard has three TypeC ports in total, namely USBC1, USBC2, and USBC3, each with a different function.

  • USBC1 is a 5V output power port, used to supply power to the RDK X3, and has no communication function;

  • USBC2 is the program flashing port of the OriginCarPro mainboard, used for flashing programs;
  • USBC3 is a dedicated communication port, used to connect to the USB port of the RDK X3 for data communication.

  • Motor ports: The OriginCarPro mainboard has four motor ports, of which MotorA and MotorB are used for left and right motor control, while MotorC and MotorD are used to turn the light strip on and off.

For more details, refer to the OriginCarPro mainboard schematic

Click to view the OriginCar Pro mainboard schematic

RDK X5

The RDK X5 is a robot development board for ecosystem developers. Its interfaces are compatible with Raspberry Pi, and it provides 10Tops of on-device inference compute as well as the processing capability of an 8-core ARM A55.

RDK_X5

Board Specifications
RDK X5
CPU Quad-core ARM® Cortex® A55@1.5G
BPU Dual-core Bernoulli Arch, ~10Tops
Memory 4GB/8GB LPDDR4 RAM
Storage NA, supports external Micro SD card Peripheral
Sensor interface 2 x 4-lane MIPI CSI
Multimedia H.265 (HEVC) Main Profile @ L5.1, H.264 (AVC) Baseline/Constrained Baseline/Main/High Profiles @ L5.2 with SVC-T encoding, H.265/H.264 encoding and decoding up to 3840x2160@60fps
USB Host 4 x USB 3.0 HOST interfaces (TYPE A)
USB Device 1 x USB 2.0 Device interface (TYPE C)
Debug serial port 1 x Debug serial port (Micro USB)
Display interface 1 x HDMI Type-A port supporting up to 1080p60
Wireless network interface Wi-Fi/Bluetooth 2-in-1 module, Wi-Fi 6 & Bluetooth 5.4
Wired network interface 1 x Gigabit Ethernet RJ45 port with PoE
40PIN interface 28 GPIOs (Reusable support 5 x UART, 8 x PWM, 3 x I2C, 2 x SPI, 1 x I2S)
Power input 5V 5A
System support Ubuntu 22.04
Onboard Interfaces

RDK_X5_onboard_description_1

RDK_X5_onboard_description_2